HARLEY DAVIDSON SCREAMIN' EAGLE TWIN CAM 103 (1690 CC) CONVERSION KIT...
download REMOVAL When servicing the fuel system, do not smoke or allow open flame or sparks in the vicinity. Gasoline is extremely flammable and highly explosive, which could result in death or serious...
View ArticleHarley Davidson Softail Drive Side Brake System Installation Manual
download Removing The Stock Components Although the PM Drive Side Brake System can be installed with the swing arm bolted to the frame, we recommend removing it for better access as well as repainting....
View ArticleHARLEY DAVIDSON HYBRID CAM PLATE AND HIGH FLOW OIL PUMP KIT REMOVAL AND...
download REMOVAL To prevent accidental vehicle start-up, which could cause death or serious injury, disconnect battery cables (negative (-) cable first) before proceeding. (00307a) Disconnect negative...
View ArticleHarley-Davidson Evolution Engines S&S Billet Rocker Cover Assemblies...
download 1. Wash motorcycle, taking care to remove sand and other abrasive debris from engine and area of frame around engine. Remove battery, gas tanks, and all parts required to access original...
View ArticleHarley-Davidson Style Rocker Cover Assemblies installation Instructions
download Installation 1. Wash motorcycle, taking care to remove sand and other abrasive debris from engine and area of frame around engine. Remove battery, gas tanks, and all parts required to access...
View ArticleIndian Rocker Arm End Play Rear Cylinder/ Front Cylinder Installation
download Rear Cylinder 1Rotate the engine so that the rear piston is at Top Dead Center (TDC), compression stroke, so no load is on the valves. 2Using a 3/16″ allen wrench, remove the four screws...
View ArticleHarley-Davidson Big Twin Evolution and Twin Cam Edelbrock/ JE Sport...
download INSTALLATION PROCEDURE Note: All Evolution® “Big Twin” pistons are marked “Front” or “Rear” and come with rings, wrist pins, and locks. • Note: We highly recommend that a dealer or trained...
View ArticleHarley-Davidson Twin Cam Engines Performer RPM Gear Drive Camshaft Kit...
download 1. Disconnect the battery, and remove the fuel tank. 2. On engines with the oil tank above the engine, drain the engine oil. 3. Remove the front exhaust pipe to clear the Cam Housing Cover. 4....
View ArticleHarley-Davidson Twin Cam Engines Cam Chain Drive System Installation and...
download Removing the Cam Chain Drive System. NOTES Changing camshafts and cam drives in the 2006-up Harley-Davidson® Twin Cam 88® engines is different than in pervious engines. Procedures require use...
View ArticleHarley-Davidson Twin Cam 88 S&S Billet Rocker Covers Installation Instructions
download Failure to confirm pushrod/lifter placement before proceeding with installation can result in damage to rocker arm support plates and other parts. With pushrods at lowest point, front piston...
View Article
More Pages to Explore .....